* Clear the ends of the tubes from isolation.
* Cut a 50 mm working tube special Pipe cutting scissors. Cutting made without distortions perpendicular to the pipe.
* Put on a pipe liner retention groove in the direction of the connected fitting.
* Perform flaring tube manual or hydraulic tool (pictured) in two steps: turning the expander tool relative to the nozzle tube, and after the first flaring – 30 ° again.
* Insert the fitting of laminated tube. After a short time (for a maximum d = 110mm – maximum of 3-4 min) pipe fitting tightly crimped.
* Apply the tool to connect smoothly, without distortions.
* Using the PEX tool, Push sleeve on the fitting until it stops.
* Insert the other end of the fitting in a pre-laminated (see p.4) the free end of connected PEX tubing.
* Apply the tool to connect smoothly, without distortions.
* Using a tool Push sleeve on the fitting until it stops.
* Ready connection is absolutely reliable and sealed.
Pumps parts and HVAC supplies
