When installing the PEX tubing and fittings use several ways to connect: butt welding on pressurized PEX tubing, often on PEX pipe sewer, ie tube attached to the pipe, and welding is possible with embedded heaters. In another method of welding is as follows: tube, then attached coupling, and it goes the other tube. Method of butt welding practice when connecting to water PEX tubing for gas tubing system and connecting tubing system, joint casings made of PEX, as well as in other cases. When using butt welding PEX tubing are needed and fittings of the same diameter and one brand that is also very important in this type of connection. The characteristic positive side butt welding is that it is very economical method as it does not require some other equipment. Note that when butt welding of PEX tubing and fittings, pipe thickness shall not be less than 5 mm. The air temperature during butt welding can vary from -15 degrees to + 45. Water pipes can be installed by the second method, it provides for fittings with embedded heaters.
At the Omsk plant of pipe insulation “as the company launched production of pipes where the customer can, along with PEX pipe fittings, order and delivery of MHP. Depending on the type of welding installation of PEX tubing and fittings can be produced in two modes: the mechanical mode and automatic mode. Production of fittings can be made to order to provide convenient and comfortable welding, depending on what you are welding. In addition, we can produce PEX pipes and fittings based on drawings provided by you.
Pumps parts and HVAC supplies
