Walters Wholesale Rotating Header Image

Radiant Heating

Learn About The Installation Of PEX Tubing

Dec 1st, 2011
by admin.
Comments are off for this post

We should go online for learning about the installation of the PEX tubing. If we know the basics of installation then we can supervise properly the plumber when he is working.

Measure the correct length of the tube required and then cut the PEX with the cutter meant for it. Keep the tube straight for not getting rough edges. A copper crimp should be put into the cut tube. Then the PEX should be left into the fitting. The copper crimp should be shifted upwards to be at a distance of 0.125inches away from the PEX tubing. A ring crimper should be applied over the copper crimp. First, close the ring crimp before curving the copper crimp. It has to be rotated for 90 degrees or else there may be uneven cuts.

A Go-No Go gauge has to be slide over the PEX tubing after it is fitted. If the gauge is sliding then the tubing is not cut properly. The PEX tubing will tend to contract one inch when there is a temperature change of ten degrees centigrade. Therefore, the plumber must do the installation so that the tubing can undergo easy contractions. For easy contractions, the PEX should be given support either vertically or horizontally.
The PEX tubing has replaced the traditional tubes by its temperature resistant and durable properties. It can be joined with any other types of traditional tubes. These tubes can be used for hot water or cold water purposes. They are flexible also and the installation is very easy.

There are different colors and sizes of the PEX available in the market. We can choose them according to our requirements. The PEX is made up of the molecules or polyethylene, which is cross-linked. They are robust because of this cross-linking. Every plumber these days prefer PEX tubing is easy to install than the traditional metal tubes.  They need very simple tools for installation purposes. There is no soldering or tedious fitting necessary for the PEX tubing. The extremes of cold and the hot temperatures are tolerated by them, so it can be used for hot water and cold-water connections. This tubing is perfect for the radiant heating systems. Here the heat is even and does not increase. The heat is increased slowly to make the room warm and cozy for the inhabitants of the house. The customer will surely be satisfied by this heating system.

Introduction to hydronic radiant heating

Dec 1st, 2011
by admin.
Comments are off for this post

Hydronic radiant heating is a technique which is used to heat a particular area. This is mostly of use in the cold countries where radiant heating is very much required. This heating technique is used indoors as well as outdoors. One common example of radiant heating is the sunshine which we overlook all the time.

The traditional radiant heating systems consisted of a fire place inside the house. This fire place was the most liked place for all the family members. However, as technology improved, the method of radiant heating also changed. One of the newest methods of heating is the hydronic radiant heating. This is a method which makes use of water in order to heat the house.

A unique feature of the hydronic radiant heating system is that it is a eco friendly method that uses water. The counter parts of this heating system do not use eco friendly ways of heating. Thus considering the vast amount of electricity that has to be saved in order to preserve the environment, people make use of the hydronic heating system. This is because, the boilers that are used in this heater consumes minimal amount of electricity.

Another feature of the hydronic radiant heating system is that it has auto turn off. This is a very good feature which helps in saving electricity as well as incurring less cost on the maintenance. In some advanced machines the heating gets turned off once the room is heated enough. The system has sensors to perform this task. However, in the older models, there was the option of setting the heaters to turn off after a certain period of time.

The above mentioned feature is of great help in offices and commercial buildings. These places consume high amount of electricity for the heaters. Thus, saving even a little bit of energy is worth the effort.

The hydronic radiant heating system is mostly used in floors. This is the best way to spread out the heat into the entire room. In most of the buildings they are also used in the walls.

However, you should make sure that in the boilers in the hydronic radiant heating system is in proper condition once in six months. This is important to prevent any mishaps that can happen due to the malfunction of the boilers. Thus, it is very easy and cheap to maintain the PEX tubing system.

Radiant Scheme PEX Manifolds

Dec 1st, 2011
by admin.
Comments are off for this post

All one’s demands of their household plumbing needs can be meeting from side to side the PEX Manifolds scheme, as it is actually effective as well as useful. Collecting and dealing out water in PEX route of the PEX radiant scheme is the major function of beaming heat manifold. These are usually sold in 2 pairs, the return and supply. Supply of PEX manifolds facilitates by distributing hot water as of from boiler and to various passages. Normally set with PEX, the opening of this radiant manifold after that provide water anywhere it is essential for example baseboards or radiators. On one occasion the hot water is moved, the PEX piping then distribute the water reverse to the arrival PEX that collect and transmit water reverse to the warmth basis.
Radiant PEX manifolds are recognized as to the openings on manifolds. Always, zone is puzzled with courses. To differentiate one an additional, be acquainted with that state denotes a part where it desires to be heated for instance a convinced room while circuits demote to the PEX piping located in the provide to the comeback PEX.
Balancing taps: Regulates the pour of water through needed openings in radiant PEX manifolds. This is extremely important piece of PEX plumbing as taps provide various purposes such as adapting the heat in all routes in the temperature system and leaping the PEX system.
Drain tap: It is significant to drainpipe the radiant scheme for preservation so as to keep it operational efficiently. Drainpipe valves craft it simpler to purge as well as fill the scheme at a faster pace.
Air expels: Used to get rid of air as of the heating method, air vents approach in two categories, manual and automatic versions. The instruction manual version merely permits the air only to retreat merely in the first stages. Alternatively, automatic air expel version will take away the air lack needing any divide device.
Flow gauge: This device manage the quantity of water which stream all the way through the beaming manifold opening in GPM and gallons per miniature. This is one more important piece of PEX manifolds method because without good manager of water, the entire system cannot effort powerfully. The flow gauges are usually finished from cylindrical-shaped goblet or apparent plastic by red-coloured drift inside.
Separation ball tap: Shut-off tap that attach the providers and return rows to the PEX manifolds. Another surface of the machine is put in a unique connection entire the other surface is 1-inch NPT bay.

The arrangement of PEX manifolds

Gas Radiant Heaters for heating your home with gas

Nov 16th, 2011
by admin.
Comments are off for this post

If you are thinking of buying a gas radiant heater, you may be pleasantly surprised to know that this type of heat is going to save you energy and money. Radiant heat normally is installed under the floors of a home. It can be along the baseboards as well. The walls are also another option for the installation of radiant heat.

As with other methods of heating your home, such as hydronic or electric radiant heating, the benefits of this type of heat are immense. They do not require vents or fans. This is great for cutting down on the dust in your home. If you have pets, the hair will not be floating around your home. You may find yourself having to clean less. You can place your furniture anywhere you want without worrying about blocking anything.

Gas radiant heat allows each room to be heated the way you want. More or less, it is up to you. If you like to save money, and these days who doesn’t, by controlling the heat that is used in each room, you will save money. This is one of the more useful aspects of this type of heating.

When you use a conventional heating source which has one thermostat, the rooms are all heated at the same level. Some rooms need less heat than others. The laundry room does not need to be heated even when it is not in use. The kitchen probably needs less heat when you are cooking. With the oven on and burners on, the room is probably already warm enough.

Research has shown that gas radiant heating costs almost 40 percent less to run than electric heating systems. The cost of installing the system is not expensive. If your home is well insulated, running it should make a big difference in your heating bills.

Have you ever noticed that when your feet are cold, you feel cold all over? Gas radiant heat can put your feet back into the warm zone. The heat will start at your feet and radiate upwards. Instead of warming spots in your house, you can heat the whole room with radiant heat. When objects that are cool absorb heat, they radiate it as well, in turn warming objects and people around them much like the sun does.

Another great benefit is the quietness of running gas radiant heat. No noisy blowers and hearing the clank of the system kicking on and off. These types of heating systems for your home are energy efficient, have different designs, are easy to install, and they pay for themselves with the savings you will realize.

When you decide to check out gas radiant heaters, talk to a few people who have them. Find out how much they have saved on their electricity bill. The best way to find out if you think you will like this type of heat, is to talk to others who have it. You can also check out the savings they have received on their electricity bills.

CPSC Announces Recall Of Turner Heaters

Redesign your house with PEX Universe

Oct 6th, 2011
by admin.
Comments are off for this post

PEX is actually comprised of cross linked polyethylene which is mainly included to give more strength to PEX pipes. By installing PEX in your home, you can prevent dangers of water leakage which are common in copper or brass pipes. PEX has natural resistance to corrosion or damp formation. It is considered to be more durable and is safe from the different chemical attacks underground. You can consider PEX Universe to get the best quality PEX equipments. Due to its amazing resistance, PEX has the ability to survive extremely hot and cold temperatures. This is the reason PEX is widely used for hot & cold water applications throughout the world.

In the year 1960, it was first developed in Europe, but nowadays, it is widely used across the world. There is an immense growth in the development of PEX equipments from the last few years. It is mainly due to its incredible strength and good durability. PEX is not limited to tubing or piping but it is also used for snow melting and radiant heating applications as well. PEX works very well even at temperature below 200 degree F. Due to such amazing capability, several people make use of PEX in cold storage houses, refrigeration, ice rinks and hot & cold water applications.

PEX plumbing is also used for the redesigning of houses as PEX installation is extremely easy as compared to installation of copper and brass pipes. There is a huge risk of different kinds of chemical exposures in plumbing environment. Copper or brass pipes are unable to withstand such chemical exposures for long time and thus can become a headache for you. On the other hand, PEX pipes are resistant to different chemicals which in turn provide longevity. You can relax for at least 10 years after installing PEX pipes in your house. Due to the smooth interior of PEX pipes, you can get safe water. Also, a plumber needs to work with a few joints while installing PEX pipes.

Few joints simply mean fast installation and cheap labor. There are different kinds of PEX tubing available and one can choose depending upon the choice and requirements. You can also get different plumbing products from PEX Universe at very reasonable prices. You can choose from radiant heating, plumbing supplies and several other heating supplies. Also, PEX is environment friendly as it gets completely damaged if left outside. So, have a look at the wide range of PEX supplies and get it installed in your house to get rid from water leakage problem.

 

Press releases:

PexUniverse.com Announces It’s Readiness for 2011-2012 Winter Season As Well As Launch of Two New Product Lines

PexUniverse.com Launches PEX-Al-PEX Tubing Product Line

PexUniverse.com Announces New Programs, Products and Savings

 

← Earlier Posts